Thorough Guide to Resolve Netgear IP Address Conflict Error

Are you struggling with the IP address conflict error with your Netgear wireless range extender? Well, that might because of the following reasons:

  • Two computers are using the same static IP.
  • You have connected two or more wireless range extenders to the network and various devices have DHCP have enabled on them.
  • In case there are multiple network adapters, chances are that your computer has an IP address conflict within itself.

Now that you are well aware of the reasons behind the Netgear WiFi extender IP address conflict error, follow the hacks mentioned below in order to resolve it.

Resolved: Netgear IP Address Conflict Error

1) Reboot Your Netgear Extender

We did not mention this thing above but technical glitches can also be one of the major reasons why you are facing the IP address conflict error with your Netgear wireless range extender.

To get rid of these glitches, you need to reboot your WiFi device. Here’s how:

  1. Disconnect all your client devices connected to the network of the extender.
  2. Turn off your Netgear extender and unplug it from its power source.
  3. Wait for a couple of seconds.
  4. Then, plug your Netgear extender back into its power source and turn it on.
  5. Reconnect your client devices to the network of the range extender.

Once you are done rebooting your Netgear wireless extender, check whether you were able to troubleshoot the IP address conflict error. If not, it is advised that you keep reading.

2) Perform Netgear Firmware Update

Every Netgear wireless range extender comes embedded with software called firmware. This software takes care of the overall functionality of your device. But, if not updated on time, it can also degrade the performance of your extender. Thus, ensure that the firmware of your device is running on an updated version.

Wondering how to perform Netgear extender firmware update? Well, here is how you can go about the process:

  1. Switch on your computer or laptop.
  2. Open an internet browser such as Google Chrome, Mozilla Firefox, Apple Safari, Opera, Microsoft Edge, Internet Explorer, etc.
  3. In the address field of the internet browser, type http://mywifiext.
  4. Press the Enter key.
  5. You will get welcomed by the official login page of your Netgear extender.
  6. When prompted, fill in the default admin username and password.
  7. Click the Log In button.
    Note: If you are not sure regarding the default login credentials, we recommend that you get in touch with technical experts. They will definitely be of some help.
  8. Once you have logged in, head over to the Settings menu.
  9. Under the Maintenance option, click Firmware Update.

In some time, the firmware of your Netgear wireless range extender will get updated to the latest version.

3) Reset Your WiFi Range Extender

Even after following the troubleshooting hacks mentioned above, are you still struggling with the IP address conflict error with your Netgear wireless range extender? Well, that isn’t good. But, worry not. We still have one more hack left for you to implement. And that is, resetting your device.

Here is how you can reset your Netgear wireless range extender:

  1. Look for the Reset hole on your WiFi device.
  2. Take a pointy object and carefully insert it into the hole.
  3. Wait for some time.

As soon as you are done resetting your Netgear range extender, reconfigure it.

Wrap Up

Troubleshooting the IP address conflict error is not that difficult. However, many users face issues while doing so. If you carefully follow the hacks mentioned above, there is nothing that can stop you from changing your fate.

On the off chance, you are still struggling with the same issue; feel free to contact our well-versed experts. They are always on the ball to help out users stuck with extender-related issues.