Netgear AC750 Setup | EX2800

Looking to boost your existing WiFi? Consider doing Netgear AC750 setup that supports FastLane technology for offering high-speed internet connectivity. Supporting 802.11ac WiFi devices, Netgear EX2800 delivers AC dual band WiFi up to 750Mbps. Best of all, the Netgear EX2800 WiFi range extender works best with any standard router, so there is no need to replace your current WiFi device.

Netgear AC750 EX2800 is an ideal option for HD streaming and gaming. If you want to enjoy a stronger WiFi signals in all corners of your home including hard-to-reach areas, then first you need to consider doing Netgear AC750 setup. You can configure the device using two different methods.

Here’s how to set up Netgear AC750 EX2800 WiFi range extender.

Netgear WiFi Range Extender AC750 Setup | EX2800

Using Netgear Installation Assistant
To perform Netgear AC750 Setup using the manual method:

  • Turn on your Netgear Nighthawk EX2800 AC750 WiFi range extender.
  • Place it closer to your WiFi router.
  • Plug your range extender into a power outlet.
  • Wait for the Power LED on your device to turn green.
  • Connect your WiFi router to the AC750 extender.
Netgear EX2800
  • Launch a web browser and navigate to for accessing the EX2800 extender login page.
  • The NETGEAR installation assistant displays.
  • Follow the on-screen prompts to connect your AC750 WiFi range extender to your existing WiFi network.
  • Move your AC750 extender to a new location that is about midway between your router and the area with a poor WiFi signal.
  • If you get no connection or a poor connection, move the range extender closer to your WiFi router and try again until the Link Status LED lights white.
  • After you find the best location for your AC750 EX2800 extender, connect your client devices to the extended WiFi network for start enjoying the use of internet.

That’s how you can perform Netgear EX2800 AC750 setup.
In case you can’t successfully complete the Netgear Nighthawk AC750 setup process, feel free to reach out to our experts.

Call Toll Free for Support: 1-866-889-0666

Netgear Extender AC750 Setup | EX2800

WPS Method

To perform Netgear AC750 Setup using WPS:

  • Place your WiFi extender close to your existing WiFi router.
  • Plug your range extender into a power outlet.
  • Wait for the Power LEDs on it to lit.
  • Press the WPS button on the AC750 extender.
  • If the Link Status LED lights white, the connection between your router and extender is good. Link Status LED will light blue if the connection is good. If the Link Status LED lights amber or red, move the EX2800 AC750 extender closer to the WiFi router and try connecting again.
  • Move your AC750 range extender to a new location that is about halfway between your router and the area with a poor router WiFi signal.
  • Take your WiFi-enabled computer or mobile device to the location with poor WiFi router coverage.
  • Connect your WiFi-enabled computer or mobile device to the extended network.
Netgear EX2800 Setup

In case of any assistance, while doing the Netgear AC750 setup, you are suggested to take help of expert professionals.

Netgear WiFi Extender EX2800 Setup | AC750

Common Issues

  • Netgear extender default web address is not working
  • WiFi extender is connected but no internet
  • EX2800 AC750 WiFi extender is not connected to the network
  • Issues while accessing default IP address
  • Netgear genie smart setup page continues to appear even after Netgear WiFi extender EX2800 setup
  • Can’t log in to Netgear EX2800 AC750 extender
  • Can’t access default web address after a firmware update on EX2800 AC750
  • WiFi extender not connecting to the internet
  • Netgear range extender not working
  • Netgear AC750 extender red light causing issues
  • Internet connected but my extender not working

Netgear EX2800 Setup | AC750 Extender

Troubleshooting Steps

Users often face issues while installing their Netgear AC750. If you are also facing problems while accessing the dashboard of your extender EX2800 AC750, go through the below-mentioned troubleshooting steps to fix Netgear Nighthawk AC750 setup issues:

  • Make sure that the WiFi extender is receiving proper power supply from the wall outlet.
  • Confirm that the wall plugin in which the EX2800 range extender is plugged in is not damaged or short-circuited.
  • Access a high-speed internet connection on your WiFi device.
  • Check all the wired connections. You are advised to not use any damaged cable.
  • Keep your WiFi range extender away from walls, reflexive surfaces, room corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, refrigerators, metal objects, aluminum studs, etc.
  • If you are getting issues with the default web address of Netgear AC750, be certain that you have entered the correct URL in the address bar.
  • Power cycle your Netgear Nighthawk EX2800 AC750 once and try again.
  • Use only the latest version of the web browser during Netgear WiFi extender login.
  • Update the latest Netgear firmware version on your EX2800 AC750 extender and Reset the extender to its factory default settings.

None of the aforesaid troubleshooting tips resolve your issues? Don’t panic. We’re here to help! Just contact our technical experts for quick and immediate assistance.

Call Toll Free for Support: 1-866-889-0666

Disclaimer: provides technical assistance for various issues related to Netgear WiFi range extenders on this website. We have no direct or indirect alliance with any third-party organization. Any usage of images, brand name, products, trademarks, and logos are just for referential purpose.