By Reynold Gibson |

How to Fix IP Conflict Error With Netgear Extender?

If you have ever seen the IP conflict error pop-up, you might wonder what this message indicates. Well, we have got you covered! Let’s have a glance at what a Netgear extender IP address conflict error is, how it happens, and the troubleshooting hacks to get it fixed when it pops up. Read on.

What is a Netgear IP Conflict Error?

For newbies, an IP address is a unique series of random numbers, joined by periods. Generally, the IP or Internet Protocol address is the identity of a device, whether it is a smartphone, computer, tablet, or laptop. It allows devices to broadcast data back and forth to communicate across networks.

An IP address conflict error appears when more than one device on the same network is allocated the same IP address. The extender makes use of the IP addresses to direct network traffic to the correct devices.

In case the same IP is assigned to two devices, the network becomes baffled by the duplicate IPs and thus unable to use them in the right manner. As a result, you face issues while accessing, shopping online, or doing any other online activity.

Let’s have a look at some basic reasons why the IP conflict error arises with Netgear extender:

  • You have connected two or more WiFi extenders to the network and various devices have DHCP enabled on them.
  • Two PCs are using the same static IPs.
  • One computer is using a static IP falling into the DHCP range for the local network and the same IP is allocated to the computer that is being used by the DHCP server.
  • If there are multiple network adapters, possibilities are that your computer has an IP address conflict with itself.

Get the Netgear IP Address Conflict Error Fixed Now!

1. Reboot Your Netgear Extender

Rebooting or power cycling can fix major technical issues with the Netgear extender. Here’s how to reboot your Netgear range extender:

  • Unplug your Netgear wireless range extender.
  • Carefully disconnect all wires connected to your extender.
  • Wait for some time.
  • Now, reconnect the cables to your extender.
  • Power the Netgear extender back on again.

2. Change Settings of Your Netgear WiFi Extender

Rebooting doesn’t work for you? If so, chances are that your extender is working in the AP mode.

  • Log in to your Netgear range extender via IP.
  • Go to the Advanced Settings section.
  • Now, verify if the extender is in the AP mode.
  • In case the DHCP is enabled, then it causes the same IP to be given to multiple devices.

So, make sure to disable the DHCP for your Netgear extender.

3. Update Your Extender Firmware

In the event that you experience chronic IP address conflict errors, there is a need to update your Netgear range extender’s firmware. Chances are that your DHCP server has malfunctioned and assigned the same IP to two systems, resulting in constant conflicts.

In this case, updating the Netgear extender firmware to the most recent version can help you out. You can download and install the latest firmware version from the official website of your WiFi range extender.

So, these were some of the easy fixes to get rid of the IP conflict error with Netgear extender. If you are still facing the same issue, bear in mind to contact our highly-experienced technicians and fetch prompt solutions.