Netgear AC750 setup | EX3110

Are you facing connectivity issues from your existing router? Is your router alone is not covering all areas in your home? No need to worry! This is the best time to set up a WiFi range extender for boosting the existing WiFi signals. There are n numbers of extenders available in the market, but Netgear EX3110 Setup can take your internet experience to the next level.

If you are setting up Netgear AC750 EX3110 for the first time and is not familiar with the complete installation steps, read on the page to know each and everything related to EX3110 Netgear AC750 setup.

Now, let’s take a plunge and start with the Netgear Extender Setup. There are two methods using which you can perform Netgear AC750 setup. They are manual and WPS method.

Netgear AC750 Setup | EX3110

Using Manual Method

For Netgear AC750 Setup using the NETGEAR installation assistant:

  • Turn on your Netgear Nighthawk EX3110 AC750 WiFi range extender.
  • Place it closer to your existing WiFi router.
  • Plug your extender into an electrical outlet.
  • Wait for the Power LED to turn green.
  • Connect your router to the extender.
  • Launch a web browser and go to default web address to access the extender login page.
  • The NETGEAR installation assistant displays.
Netgear AC750
  • Follow the on-screen prompts to connect your AC750 range extender to your existing WiFi network.
  • Move your AC750 extender to a new location that is about halfway between your router and the area with a poor WiFi signal.
  • If you get no connection or a poor connection, move the extender closer to your router and try again until the Link Status LED lights white.
  • After you find the best location for your AC750 EX3110 extender, connect your client devices to the extended WiFi network.

That’s how you can perform Netgear EX3110 AC750 Setup.

In case you can’t successfully complete the Netgear Nighthawk AC750 setup process, feel free to reach out to our proficient experts.

Netgear Nighthawk AC750 Setup | EX3110

WPS Method

Netgear EX3110 Setup
  • Turn on your Netgear Nighthawk AC750 WiFi range extender.
  • Place your WiFi extender close to your existing WiFi router.
  • Plug your AC750 range extender into a power outlet.
  • Wait for the Power LEDs on it to lit.
  • Press the WPS button on the AC750 extender.
  • If the Link Status LED lights white, the connection between your router and extender is good. Link Status LED will light blue if the connection is good. If the Link Status LED lights amber or red, move the EX3110 extender closer to the WiFi router and try connecting again.
  • Move your AC750 range extender to a new location that is about halfway between your router and the area with a poor router WiFi signal.
  • Take your WiFi-enabled computer or mobile device to the location with poor WiFi router coverage.
  • Connect your WiFi-enabled computer or mobile device to the extended network.

Netgear WiFi Extender EX3110 Setup | AC750

Common Issues

  • Netgear extender default web address is not working
  • WiFi extender is connected but no internet
  • EX3110 AC750 WiFi extender is not connected to the network
  • Can’t log in to Netgear EX3110 AC750 extender
  • Can’t access default web address after a firmware update on EX3110 AC750
  • WiFi extender not connecting to the internet
  • Netgear Extender not working
  • Issues while accessing default IP address
Netgear Troubleshooting
  • Netgear genie smart setup page continues to appear even after Netgear WiFi extender EX3110 setup
  • Netgear extender red light causing issues
  • Internet connected but not working

Netgear EX3110 Setup | AC750

Troubleshooting Steps

Users often face issues while installing their Netgear AC750. If you are also facing problems while accessing the dashboard of your extender EX3110 AC750, go through the below-mentioned troubleshooting steps to fix Netgear Nighthawk AC750 setup issues:

  • Access high-speed internet connection on your device.
  • Check all the wired connections. Do not use any damaged cable.
  • Make sure that the WiFi extender is receiving proper power supply from the wall outlet.
  • Confirm that the wall plugin in which the range extender is plugged in is not damaged or short-circuited.
  • Power cycle your Netgear Nighthawk EX3110 AC750 once and try to access it again.
  • Use only the latest version of the web browser during the WiFi extender login.
  • Keep your WiFi extender away from walls, room corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, metal objects, aluminum studs, etc.
  • If you are getting issues with the default web address, be certain that you have entered the correct URL in the address bar.
  • Update the latest Netgear firmware version on your AC750 extender.
  • Reset the extender to its factory default settings.

None of the said troubleshooting tips resolve your issues? Don’t worry. Just reach out to our experts for quick and immediate assistance.

Disclaimer: provides technical assistance for various issues related to Netgear WiFi range extenders on this website. We have no direct or indirect alliance with any third-party organization. Any usage of images, brand name, products, trademarks, and logos are just for referential purpose.