Netgear N600 Setup | WN3500RP

Netgear N600 helps in eliminating the dead zones in your house. The process of Netgear WN3500RP setup is very easy. You can make the N600 start working in a matter of minutes. With the Netgear N600 setup, areas having low reception in your home will certainly get good WiFi network coverage. Supporting 802.11ac WiFi technology, the Netgear WiFi range extender is an ideal option if you want to enjoy extended WiFi coverage in all areas of your home. With the integration of FastLane Technology, the extender helps in taking your HD streaming and gaming experience to the next level. To make the most of N600, first you need to configure it using proper setup method.

If you are not familiar with the process of how to perform Netgear N600 setup, then walk through the steps given on this page. Reading the instructions, you will easily be able to configure your WN3500RP Netgear N600 in no time.

Here’s how to set up Netgear N600 WN3500RP WiFi range extender.

Netgear Extender N600 Setup | WN3500RP

WPS Method

For commencing Netgear N600 Setup using WPS:

  • Turn on your N600 Netgear WiFi range extender.
  • Place your device close to your WiFi router.
  • Plug it into a working power outlet.
  • Wait for the Power LEDs on it to lit.
  • Now, press the WPS button on the Netgear N600 extender.
  • If the Link Status LED lights white, the connection between your WiFi router and N600 extender is good. And the connection is good, the Link Status LED will light blue. If the Link Status LED lights amber or red, move the WN3500RP N600 extender closer to the WiFi router and try connecting it again.
  • Move your range extender to a new location that is about halfway between your existing router and the area with a poor WiFi signal.
  • Take your WiFi-enabled computer or mobile device to the location with poor WiFi router coverage.
  • Connect your WiFi-enabled computer or mobile device to the extended network.
Netgear WN3500RP Setup

Call Toll Free for Support: 1-866-889-0666

Netgear WiFi Range Extender N600 Setup | WN3500RP

Using Netgear Installation Assistant

For executing Netgear N600 Setup using the manual method:

  • Turn on your Netgear Nighthawk WN3500RP N600 WiFi range extender.
  • Place it closer to your WiFi router.
  • Plug the device into a power outlet.
  • Wait for the Power LED on it to turn green.
  • Connect your existing router to the N600.
  • Launch a browser and visit the default web address for accessing the WN3500RP extender login page.
  • The NETGEAR installation assistant displays.
  • Follow the on-screen instructions to connect your N600 WiFi range extender to your existing WiFi network.
  • Move your range extender to a new location that is about midway between your router and the area with a poor WiFi signal.
  • If you get no connection or a poor connection, move the N600 range extender closer to your WiFi router and try again until the Link Status LED lights white.
  • After you find the best location for your N600 WN3500RP extender, connect your client devices to the extended WiFi network to start enjoying the use of the internet.

That’s how you can perform the Netgear N600 setup.

In case of any assistance, while doing the WN3500RP Netgear extender setup, you are suggested to take the help of expert professionals.

Netgear WiFi Extender WN3500RP Setup | N600

Common Issues

  • Netgear extender default web address is not working
  • WiFi extender is connected but no internet
  • WN3500RP N600 WiFi extender is not connected to the network
  • Issues while accessing default IP address
  • Netgear genie smart setup page continues to appear even after Netgear WiFi extender WN3500RP setup
  • Can’t log in to Netgear WN3500RP N600 extender
  • Can’t access default web address after a firmware update on WN3500RP N600
  • WiFi extender not connecting to the internet
  • Netgear range extender not working
  • Netgear N600 extender red light causing issues
  • Internet connected but my extender not working
Netgear N600 Setup

Netgear WN3500RP Setup | N600 Extender

Troubleshooting Steps

Users often face issues while configuring their Netgear N600. If you are also facing problems while accessing the dashboard of your N600 extender, go through the troubleshooting steps listed below to fix Netgear N600 setup issues:

  • Make sure that the WiFi extender is receiving proper power supply from the wall outlet.
  • Confirm that the wall plugin in which the WN3500RP range extender is plugged in is not damaged or short-circuited.
  • Access a high-speed internet connection on your WiFi device.
  • Check all the wired connections. You are suggested to not use any damaged cable.
  • Keep your WiFi range extender away from walls, reflexive surfaces, room corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, refrigerators, metal objects, aluminum studs, etc.
  • If you are getting issues with the default web address of Netgear N600, be certain that you have entered the correct URL in the address bar.
  • Power cycle your Netgear Nighthawk WN3500RP N600 once and try again.
  • Use only the latest version of the web browser during Netgear WiFi extender login.
  • Update the latest Netgear firmware version on your N600 extender and reset the WiFi extender to its factory default settings.

None of the above-listed troubleshooting tips help in resolving your issues? There is no need to worry. We’re here to help! Just get in touch with our technical experts for quick and immediate assistance.

Call Toll Free for Support: 1-866-889-0666

Disclaimer: provides technical assistance for various issues related to Netgear WiFi range extenders on this website. We have no direct or indirect alliance with any third-party organization. Any usage of images, brand name, products, trademarks, and logos are just for referential purpose.