By Reynold Gibson |

Complete Guide on Netgear WiFi Extender Lights

Setting up a WiFi extender can greatly improve the range and coverage of your home network. Netgear WiFi extenders are popular devices that help boost WiFi signals and eliminate dead zones in your home. As you get started with your Netgear WiFi extender, it’s essential to understand the meaning and significance of the different lights on the device. In this blog, we’ll walk you through the various Netgear WiFi extender lights and explain what they indicate about the device. So we advise the users read out this entire post without missing any point. Before we move further we would like to tell you about the names of Netgear extender lights so that you can take an idea about the lights and will understand them easily.

Names of Netgear WiFi Extender Lights

  • Client LED
  • Power LED
  • WiFi Connection LED

Now you are aware of the Netgear extender lights name. To know more about them move to the next section in which we explain all of them in detail.

Netgear WiFi Extender Lights Meanings

Power LED Light

Let’s start with the power light, which you usually see on the back panel of the extender . Whereas, the location of the power LED varies from model to model. Below we have discussed this light colors meaning: Solid Green: When the power light is solid green, it means the extender is properly connected to a power source and is turned on. No Light: If the power light is off, make sure the extender is plugged in and the power switch is in the “On” position.

WiFi Connection LED Light

You can see the connection light during the Netgear WiFi extender setup, which show the status of the wireless connection between the extender and your existing WiFi router. Here’s what the different Netgear WiFi extender lights colors mean: Solid Green: A solid green light signifies a good connection between the extender and your router. It indicates that the extender is in the right location and has established a strong WiFi connection. Solid Amber: Solid amber light indicates a fair or moderate connection. This means the extender is placed too far from the router, resulting in a weaker signal. Try moving the extender closer to the router for better performance. No Light: It means the extender is not connected to your router. Check the Ethernet cable or wireless connection between the router and the extender.


The WPS (Wi-Fi Protected Setup) light is used for quick and secure connections between the extender and your router. Here is the meaning of different Netgear WiFi extender lights colors of the WPS button:

Solid Green: A solid green light on the Netgear extender shows that the WPS connection has been established successfully between the extender and the router. Blinking Green: A blinking green light means the extender is actively trying to establish a WPS connection with the router. No Light: If there is no light, it means the WPS feature is not active or has not been initiated. You can manually configure the extender’s settings using the web-based setup interface.

Client Connection Light

The client connection light on your Netgear extender illustrates the status of devices connected to the extender’s network. Here is the meaning of Netgear WiFi extender lights: Solid Green: A solid green light indicates that one or more devices are connected to the extender’s network and are functioning properly. No Light: No light means devices are not currently connected to the extender. Make sure your devices are within range of the extender and connected to its network.


Understanding the Netgear WiFi extender lights is crucial for troubleshooting and ensuring optimal performance. By familiarizing yourself with the power light, WiFi connection light, client connection light and WPS light, you can quickly identify any issues and take action at the right time.