Here’s Why Netgear Extender Won’t Connect To Router

Netgear extender won’t connect to router? Worry Not! You have stumbled upon the right page. This blog gives you access to various troubleshooting tips right from the table of experts so that you can cope up with the Netgear extender not connecting to the router issue in a hassle-free manner.

Why Netgear Extender Won’t Connect to Router

If you have recently purchased a Netgear extender to expand your current WiFi coverage, then we must say you have made a great choice. However, users sometimes face issues while connecting their extenders to the home routers. If you are also struggling with the same and your internet using experience has come to a halt, then walk through the steps below and get rid of the Netgear extender won’t connect to router issue in a snap.

There could be various reasons preventing you from connecting your extender to the router. Right from the improper configuration of your device to the loose wired connections, a number of culprits can be there causing the Netgear extender won’t connect to the internet issue for you. We are now going to give you a nudge on all the possible reasons causing the issue for you along with their tested solutions. Let’s get started.

Fix Netgear Extender Won’t Connect to Internet

Cause: Improper Connectivity

Solution: If the cable used by you to connect your extender to the router is not working properly, you will not be able to connect both devices in a successful manner. Therefore, consider changing the cable if you find any cut or breakage in it.

Apart from that, you are suggested to use power sockets that are supplying fluctuation-free power to both your router as well as the extender.

Cause: Bad Placement

Solution: Placing your extender to the right location also matters when it comes to connecting it to your home WiFi router. While or after doing the Netgear extender setup, make sure your device is far from electronic devices that emit radio waves. Also, you need to keep your device at bay from metal objects, aluminum studs, concrete walls, reflexive surfaces, fish tanks, etc.

It is better to place your extender in the central area of your home and over a higher surface. This way your device will send WiFi signals to all areas in the equal manner, thus letting you enjoy the internet without any lag.

Cause: Technical Glitch

Solution: Your Netgear extender won’t connect to router if there is a technical glitch in the hardware or software of your device. For getting this fixed, power cycle your extender. This can be done by unplugging your extender from its socket. However, after a gap of a few seconds, you need to plug back the device into its power socket.

After powering it up, check if your extender is now connected to your router or not. If not, perhaps there is some issue with your Netgear router setup. In such a situation, you can also power cycle your router and see if the trick works for you.

Cause: Improper Configuration

Solution: Last but not least, you may also get into the trouble of Netgear extender won’t connect to router issue if your WiFi range extender is not configured in a proper manner. For fixing this, you need to reset your range extender to the factory defaults.

Once done, again perform the set up of your range extender and try connecting it to your router. This time, perhaps you will get success with the process of connecting your extender to the router.

Wrapping Up

With the use of troubleshooting tips given above, you will be able to get rid of the Netgear extender won’t connect to router issue. Just in case the problem still sucks and you are unable to do away with it, consider contacting our team of experts for quick help.